Removing A Hard Drive/Ssd - Dell PowerEdge FC630 Owner's Manual

Removing a hard drive/SSD

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Take the hard drive/SSD offline and wait until the hard-drive/SSD indicator codes on the drive carrier
are off.
When all indicators are off, the drive is ready for removal. See your operating system documentation
for more information on taking the hard drive/SSD offline.
NOTE: All operating systems do not support hot-swappable drive installation. See the
documentation supplied with your operating system.
Steps
1. Press the release button to open the hard-drive/SSD carrier handle.
2. Slide the hard-drive/SSD carrier out until it is free of the hard-drive/SSD slot.
3. Slide the hard drive/SSD out until it is free of the hard-drive/SSD bay.
Figure 25. Removing and installing a hard drive/SSD
1. release button
3. hard drive/SSD
Next steps
1. If you are removing a hard drive/SSD permanently, install the hard-drive/SSD blank. If you are
installing a new hard drive/SSD, see
Safety instructions.
2.
4.
Installing a hard drive/SSD.
Get other manuals https://www.bkmanuals.com
hard-drive/SSD connector (on backplane)
hard-drive/SSD carrier handle
71