The Installation Menu - Sony VPL-FH500L Operating Instructions Manual

The Installation Menu

The Installation menu is used for installing the projector.
Setting items
Image Flip
Installation Attitude Right Side UP/Upside Down/Front Up/Front Down: Change the cooling
High Altitude
*1
Mode
*2
Screen Aspect
*3 *4
V Keystone
*2 *5
Panel Alignment
26
The Installation Menu
Description
HV/H/V/Off: Flips the projected image horizontally and/or vertically
according to the installation method.
setting to suit to the installation attitude. Continuing to use the wrong
setting may affect component reliability.
Right Side Up
On/Off: Set to "On" when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
16:10/16:9/4:3: For switching the display area to suit to the screen.
The higher the setting, narrower the top of the projected image. The lower
the setting, the narrower the bottom.
This feature allows you to adjust the gaps in the color of characters or the
picture.
When set to "On," "Adjust Color" and "Pattern Color" can be assigned and
adjusted.
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color. Select
"R" (Red) or "B" (Blue) to make adjustments based on "G" (Green).
Pattern Color: Select "R/G" (Red and Green) or "R/G/B" (White, all
colors) when "Adjust Color" is "R" (Red). Select "B/G" (Blue and Green)
or "R/G/B" (White, all colors) when the "Adjust Color" is "B" (Blue).
Adjust: The shift adjustment and zone adjustment of the color selected in
"Adjust Color" can be made with V/v/B/b buttons.
Front Up
Upside Down
Front Down