Projecting/Adjusting An Image; Projecting An Image - Sony VPL-FH500L Operating Instructions Manual

B Projecting/Adjusting an Image

Projecting an Image

The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size. For details on projection distances
and projected image sizes, see
4
Video equipment
1
Plug the AC power cord into a wall
outlet.
2
Connect all equipment to the projector
(page 8).
3
Turn on the projector.
Press the ?/1 key on the projector or the
? key on the Remote Commander.
4
Turn on the connected equipment.
5
Select the input source.
Press the INPUT key on the projector to
display the input select window. Press
the INPUT key repeatedly or the V/v
key to select an image to be projected.
The signal icon
side in the input select window when a
signal is input.
12
Projecting an Image
"Projection Distance and Lens Shift Range" (page 54)
Input select window
5
Input
Video
S-Videoo
Input-A
Input-B
Input-C
Input-D
Input-E
Sel
6
Computer
2
appears on the right
Skip
1
Projector
You can select the input source using
Direct input select keys on the Remote
(page 5)
Commander
6
Switch your computer to output to
external display by changing your
computer's setting.
How to switch the computer to output to
the projector varies, depending on the
type of computer.
(Example)
+
7
Adjust the focus, size, and position of
the projected image (page 13).
.
3
5
INPUT
Wall outlet
.