Table of Contents
Advertisement
The Installation Menu
The Installation menu is used for installing the projector.
Setting items
Edge Blending
Blending
Range
Zone Black
Level Adj.
*2
Blend
Gamma
Reset
Image Split
*4
Screen Fitting
*5 *6
V Keystone
*5 *6
H Keystone
*6
Warping
Image Flip
32
The Installation Menu
Description
On/Off: When set to "On," the Edge Blending function is enabled. Set to
"Off" when you do not project using multiple projectors.
Sets the edge blending width.
After selecting the blending position, a marker will be displayed.
Top: Adjusts the top width of the screen.
Bottom: Adjusts the bottom width of the screen.
Left: Adjusts the left width of the screen.
Right: Adjusts the right width of the screen.
Adjust so that the overlapped part is not noticeably bright when a dark
*1
image is displayed.
Select the correction zone "Adjust Zone 1" through "Adjust Zone 9," and
set the adjustment values.
Sets the mode of the gamma curve of the overlapped area.
Mode 1: Provides a gentle gamma correction curve.
Mode 2:
Mode 3:
Mode 4:
Mode 5: Provides a sharp gamma correction curve.
Resets the adjusted values to their default values.
Off/Left-side Area/Right-side Area: Divides the input signal from the
computer in half, and displays an enlarged image of the left-side or right-side
area on the screen.
HV Keystone/Warping: You can choose the way to correct image twist.
This is displayed when "HV Keystone" is selected in "Screen Fitting."
The higher the setting, the narrower the top of the projected image. The
lower the setting, the narrower the bottom of the projected image.
This is displayed when "HV Keystone" is selected in "Screen Fitting."
The higher the setting, the narrower the right side of the projected image.
The lower the setting, the narrower the left side of the projected image.
This is displayed when "Warping" is selected in "Screen Fitting."
Adjust: Corrects image twist.
Reset: Resets the adjusted values to their default values.
HV/H/V/Off: Flips the projected image horizontally and/or vertically
according to the installation method.
*3
Advertisement
Table of Contents
