The Installation Menu - Sony VPL-SW526C Operating Instructions Manual

The Installation Menu

The Installation menu is used for installing the projector.
Items
Image Flip
Installation Attitude Right Side Up/Upside Down/Front Up/Front Down/Link to Image
High Altitude
*2
Mode
*3
V Keystone
Notes
*1: Select "Link to Image Flip" only for horizontal installation. Be sure to select "Front Up" or
"Front Down" for vertical installation, according to the installation direction of the projector.
(Refer to the figures.)
*2: When "High Altitude Mode" is set to "On," the speed of the fan increases, and the fan noise
becomes slightly louder.
*3: Since the Keystone adjustment is an electronic correction, the image may be deteriorated.
30
The Installation Menu
Item descriptions
HV/H/V/Off: Flips the projected image horizontally or vertically
according to the installation method.
Flip: Change the cooling setting to suit to the installation attitude. When
set to "Link to Image Flip," the cooling setting changes based on the setting
*1
of "Image Flip." Continuing to use the wrong setting may affect
component reliability.
Right Side Up
Upside Down
Horizontal installation
On/Off: Set to "On" when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
The higher the value, the narrower the top of the projected image. The
lower the value, the narrower the bottom.
Front Down
Front Up
(Projects
(Projects
upward)
downward)
Vertical installation