Table of Contents
Advertisement
The Installation Menu
The Installation menu is used for installing the projector.
Setting items
Image Flip
Installation Attitude Link to Image Flip/Right Side Up/Upside Down/Front Down/Front
High Altitude Mode On/Off: Set to "On" when using the projector at an altitude of 1,500 m or
*2
Screen Aspect
*3 *4
V Keystone
26
The Installation Menu
Description
HV/H/V/Off: Flips the projected image horizontally and/or vertically
according to the installation method.
Up: Change the cooling setting to suit to the installation attitude. When set
to "Link to Image Flip," the cooling setting changes based on the setting of
*1
"Image Flip."
Continuing to use the wrong setting may affect component
reliability.
Right Side Up
higher. Continuing to use the wrong setting may affect component
reliability.
16:10/16:9/4:3: For switching the display area to suit to the screen.
The higher the setting, narrower the top of the projected image. The lower
the setting, the narrower the bottom.
Front Up
Upside Down
Front Down
Advertisement
Table of Contents
