Connecting An External Monitor - Sony VPL-FH500L Operating Instructions Manual

To attach the HDMI cable
Fix the cable to the cable tie holder at the bottom of the projector, using a commercially
available cable tie, as in the illustration.
Use a cable tie of less than 1.9 mm × 3.8 mm in thickness.
Cable tie
(commercially available)

Connecting an External Monitor

OUTPUT
Projected images can be output to display equipment such as a monitor.
Display equipment
Note
This connector outputs the image. Output as a computer signal input from the RGB input connector
(INPUT A, INPUT B) or a video signal input from the YP
Mini D-sub 15-pin cable
RGB input
(not supplied)
connector
Bottom of the projector
Cable tie holder
P input connector (INPUT A).
B R
Connecting the Projector
OUTPUT
MONITOR
11