Table of Contents
Advertisement
SIMM Memory Installation
1. The SIMM memory modules will only fit in one orientation as shown because
of a "Plastic Safety Tab" on one end of the SIMM slots which requires the
"Notched End" of the SIMM memory modules.
72 Pin SIMM DRAM Sockets
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the socket.
3. With your finger tips, rock the memory module into a vertical position so that it
clicks into place.
Metal Clip
Plastic Safety Tab (This Side Only)
4. The plastic guides should go through the two "Mounting Holes" on the sides
and the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards and rock
the module out of the "Metal Clips".
20
III. INSTALLATION
72 Pin DRAM in SIMM Socket
ASUS KN97-X User's Manual
(DRAM Memory Module Example)
Notched End
Mounting Hole
1
2
3
4
Advertisement
Table of Contents
