Table of Contents
Advertisement
III. INSTALLATION
SIMM Memory Installation
1. The SIMM memory modules will only fit one way as shown. The central notch
of the module must be aligned with the rib midway inside the slot while the
other notch at one end of the module must be aligned with the plastic safety tab
on the slot.
72-Pin SIMM Sockets
2. Push the memory module gently but firmly into place starting from a 45-degree
angle making sure that all the contacts are aligned with the socket.
3. With your fingertips (pointer) on the slot's clips and your thumbs holding down
its top edges, push the SIMM into a vertical position so that it clicks into place.
Support Clip
Safety Tab (This Side Only)
4. The plastic guides must go through the two mounting holes on the SIMM's
sides.
5. If you need to remove one or more memory modules, remove them by pushing
the clips outward. The SIMM will be released from its slot, and you can pull the
SIMM straight up and out of the slot.
1 2 3 4 5 6
72 Pin DRAM in SIMM Socket
ASUS KN97 User's Manual
Rib (inside slot)
Notch
Safety tab
Mounting Hole
17
Advertisement
Table of Contents
