Table of Contents
Advertisement
III. INSTALLATION
From the Manufacturer:
Four screws should be showing next to each corner of the SEC Slot using two At-
tach Mount Bridges from the underside of the motherboard. A bottom Heatsink
Support Base should be mounted over the two chipsets in front of the slot.
View of the KN97-X Motherboard from the Manufacturer
Installing the Pentium II Processor:
1. Mount the Pentium II Retention Mechanism: Place the Retention Mecha-
nism over the SEC Slot with the Retainer's Lock Holes toward the motherboard's
memory slots and screw the Captive Nuts using a Phillips or flat head screw
driver. WARNING: Excessive torque may damage your motherboard.
Tighten captive nuts to no more than 6 1 inch/pound.
Captive Nut
Retention Mechanism in place and Captive Nut being tightened
Lock Holes
(3)
ASUS KN97-X User's Manual
Heatsink Support
Base Pin (5&6)
Support Base (7)
Screw from
Mount Bridge (1&2)
Pentium II
processor SEC slot
23
Advertisement
Table of Contents
