III. INSTALLATION
4. Lock the SEC Cartridge: Flip the SEC cartridge locks outward so that the
lock shows through the Retention Mechanism's side lock holes.
The SEC cartridge Lock
should appear here when
the SEC cartridge is properly
seated in the slot and locked.
(3)
Retention Mechanism Left Side View
5. Secure the Heatsink: Slide the Heatsink Support Top Bar into the bottom Groove
of the Heatsink until it locks into the heatsink support Base Posts.
Heatsink Support
Top Bar (4)
SEC Cartridge installed and Heatsink Support Top Bar being inserted.
6. Set Jumpers: Refer to jumper settings for "CPU to BUS Frequency Ratio" and
jumpers for "BUS Frequency Selection" if you haven't set them yet.
ASUS KN97-X User's Manual
Heatsink Support
Base Post (7)
25