Table of Contents
Advertisement
Insert the module(s) as shown. Because the number of pins are different on either
side of the breaks, the module will only fit in the orientation as shown. DRAM
SIMM modules have the same pin contact on both sides. SDRAM DIMM modules
have different pint contact on each side and therefore have a higher pin density.
r
168 Pin DIMM Memory Sockets
The Dual Inline Memory Module (DIMM) memory modules must be 3.3Volt
buffered Synchronous DRAM (SDRAM) or Extended Data Output (EDO) .
can identify the type of DIMM module by the illustration below:
DRAM Key Position
RFU -J 1 l- Unbuffered
The notch on the DIMM module will shift between left, center, or right to identify
the type and also to prevent the wrong type to be inserted into the DIMM slot on the
motherboard. You must ask your retailer for the specifications before purchasing.
Four clock signals are supported on this motherboard.
22
Buffered
88 Pins
60 Pins 20 Pins
Voltage Key Position
Lock
You
Advertisement
Table of Contents
