Commands And Syntax - D-Link DWL-8500AP - AirPremier AG Wireless Switching 108 Dualband Access Point Administrator's Manual

1. Start your SSH application. (We use PuTTY as an example.)
2. Enter the IP address of access point and click
(If your Domain Name Server is configured to map domain names to IP addresses via
DHCP, you can enter the domain name of the AP instead of an IP address.)
This brings up the SSH command window and establishes a connection to the access
point. The login prompt is displayed.
3. When the login prompt appears, enter the username and password.
The login name is admin. If you did not change the default password, press ENTER when
you are prompted for a password. The default password is blank.
After a successful login, the screen shows the (Access Point Name)# prompt. You are now
ready to enter CLI commands at the command line prompt.

Commands and Syntax

The CLI for the DWL-3500AP and DWL-8500AP provides the following commands for
manipulating objects:
• get
• set
• add
• remove
CAUTION: Settings updated from the CLI (with
be saved to the startup configuration unless you explicitly save them via the
save-running
Open
,
get set
command. For a description of configurations maintained on the
B CLI for AP Configuration
.
, , commands) will not
add remove
Commands and Syntax 127