Command Syntax - D-Link DWL-7700AP Command Line Interface Reference Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available
through the console interface uses the same syntax.
802.11 a/b/g Access Point Command Line Interface Manual
Note: All commands are case-insensitive.
Purpose Encloses a variable or value that must be specified.
Syntax set login <username>
Description In the above syntax example, you must specify the username.
Do not type the angle brackets.
Example Command set login accounting
Purpose Encloses a required value or set of required arguments. One
value or argument can be specified.
Syntax get multi-authentication [index]
Description In the above syntax example, you must specify an index to be
created. Do not type the square brackets.
Example Command get multi-authentication 2
<angle brackets>
[square brackets]
5
2
C S
OMMAND YNTAX