Command Syntax And Conventions - D-Link DAP-3690 Reference Manual

QoS
RADIUS
SNMP
Syslog Commands
User Interface
VLAN

Command Syntax and Conventions

A command is one or more words that can be followed by one or more keywords and parameters.
Keywords and parameters can be required or optional:
• A keyword is a predefined string (word) that narrows down the scope of a command. A keyword can
be followed by an associated parameter or by associated keywords. In many cases, these associated
keywords are mutually exclusive, so you need to select one of them. In some cases, this manual refers to
a group of words as a keyword.
• A parameter is a variable for which you need to type a value. You need to replace the parameter
name with the appropriate value, which might be a name or number. A parameter can be associated
with a command or with a keyword.
This manual lists each command by its full command name and provides a brief description of the
command. In addition, for each command, the following information is provided:
• Format. Shows the command keywords and the required and optional parameters.
• Mode. Identifies the command mode you need to be in to access the command. (With some minor
exceptions, the mode is always described using lower-case letters.)
• Related show command or commands. Identifies and links to the show command or commands that
can display the configured information.
For more complicated commands, in addition to the format, mode, and related show command or
commands, the following information is provided:
• Table. Explains the keywords and parameters that you can use for the command.
• Example. Shows a CLI example for the command.
Configures and displays QoS information
Configures and displays RADIUS information
Configures SNMP communities, traps and displays
SNMP information.
Manages and displays syslog messages
Describes user commands used for entering CLI
commands.
Configures VLANs and displays VLAN information.