Radio Settings; Table 38. Radio Setting Commands - D-Link DWL-8500AP - AirPremier AG Wireless Switching 108 Dualband Access Point Administrator's Manual

D-Link Unified Access Point Administrator's Guide
Table 37. Wireless Setting Commands
Action
View the radio channel.
Set the radio channel to a static channel.
Set the radio channel to "Auto"

Radio Settings

Table 38
( ). To change the wireless settings for radio 2, use
wlan0

Table 38. Radio Setting Commands

Action
View a description of the
radio interfaces
Turn the radio on
Turn the radio off
View the current radio mode
Set the radio mode to IEEE
802.11b
Set the radio mode to IEEE
802.11g
Set the radio mode to IEEE
802.11a
Set the radio mode to
Dynamic Turbo 5 GHz
Set the radio mode to
Dynamic Turbo 2.4 GHz
Enable Super-AG Mode
Disable Super-AG Mode
View the radio channel.
Set the radio channel to a
static channel.
Set the radio channel to
"Auto"
Set the Beacon Interval
Set the DTIM Interval
Set the Fragmentation
Length Threshold
Set the RTS Threshold
Set the maximum number of
clients allowed to associate
(VAP 0 radio 0)
138 © 2001-2008 D-Link Corporation. All Rights Reserved.
shows the Radio Settings commands. The commands in this table use radio 1
Command
get radio all description
set radio wlan0 status on
set radio wlan0 status off
get radio wlan0 mode
set radio wlan1 mode b (only applicable for radio
interface wlan1)
set radio wlan1 mode g (only applicable for radio
interface wlan1)
set radio wlan0 mode a (only applicable for radio
interface wlan0)
set radio wlan0 mode dynamic-turbo-a (only
applicable for radio interface wlan0)
set radio wlan0 mode dynamic-turbo-g (only
applicable for radio interface wlan1)
set radio wlan0 super-ag yes
set radio wlan0 super-ag no
get radio wlan0 channel
set radio wlan0 channel-policy static
set radio wlan0 static-channel <channel>
set radio wlan0 channel-policy best
set radio wlan0 beacon-interval <20-1000>
set radio wlan0 dtim-period <1-255>
set radio wlan0 fragmentation-threshold <256-2346>
set radio wlan0 rts-threshold <0-2347>
set bss wlan0bssvap0 max-stations <0-256>
Command
get radio wlan0 channel
set radio wlan0 channel-policy static
set radio wlan0 static-channel <channel>
set radio wlan0 channel-policy best
.
wlan1