Section 2: Commands And Syntax; Using The Get Command - D-Link DWL-6600AP Cli Command Reference

D-Link UAP CLI Command Reference

Section 2: Commands and Syntax

Configuration information for the DWL-x600AP is represented as a set of classes and objects. The CLI for the
DWL-x600AP provides the following commands for manipulating objects:
• get
• set
• add
• remove
Caution! Settings that you update using the CLI get, set, add, and remove commands are not saved to
the startup configuration unless you explicitly save them using the
description of configurations maintained on the AP and details on how to save your updates, see
"Saving Configuration Changes" on page
The following sections describe the function of each command.

Using the get Command

The command enables you to view the property values of existing instances of a class. Classes can be
get
"named" or "unnamed." The command syntax is:
get unnamed-class [property ... | detail]
get named-class [instance | all [property ... | name | detail]]
The rest of the command line is optional. If provided, it is either a list of one or more
keyword .
detail
The following example uses the
get log
There is only one log on the AP, so the command returns information on the log file.
The following example uses the
get log-entry
There are multiple log entries but they are not named in the command, so this command returns all log entries.
The following example uses the
get bss wlan0bssvap0
There are multiple BSSes and they are named in the command, so this command returns information on the
BSS named wlan0bssvap0.
D-Link
November 7, 2011
21.
command on an unnamed class with a single instance:
get
command on an unnamed class with multiple instances:
get
command on a named class with multiple instances:
get
Commands and Syntax
command. For a
save-running
properties
Unified Wired and Wireless Access System
, or the
Page 14