D-Link Unified Access Point Administrator's Guide
Table 11
Table 11. Static WEP
Field
Transfer Key
Index
Key Length
Key Type
46
© 2001-2008 D-Link Corporation. All Rights Reserved.
describes the configuration options for static WEP.
Description
Select a key index from the drop-down menu. Key indexes 1 through 4 are
available. The default is 1.
The Transfer Key Index indicates which WEP key the access point will use
to encrypt the data it transmits.
Specify the length of the key by clicking one of the radio buttons:
•
64 bits
•
128 bits
•
152 bits
Select the key type by clicking one of the radio buttons:
•
ASCII
•
Hex