2. Connect the power adapter to the power port on the back of the access point, and then plug
the other end of the power cord into a power outlet.
3. Use your Web browser to log on to the access point Administration Web pages.
If the AP did not acquire an IP address from a DHCP server on your network, enter
10.90.90.91 in the address field of your browser, which is the default IP address of the AP.
If you used a DHCP server on your network to automatically configure network
information for the AP, enter the new IP address of the AP into the Web browser.
If you used a DHCP server and you do not know the new IP address of the AP, use the
following procedures to obtain the information:
A. Connect a serial cable from the administrative computer to the AP and use a terminal
emulation program to access the command-line interface (CLI).
B. At the login prompt, enter
command prompt, enter:
get management
The command output displays the IP address of the AP. Enter this address in the
address field of your browser.
4. When prompted, enter
OK.
When you first log in, the Basic Settings page for the Unified Access Point administration
is displayed.
for the user name and
admin
for the user name and
admin
3 Installing the Access Point
for the password. At the
admin
for the password, then click
admin
Installing the Unified Access Point
27