Selecting the Cassette Type
If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
1
After pressing the MENU press the corresponding
,
buttons to select the VCR option.
❷
❿
2
Press the OK or
buttons to select this option.
Result: The VCR Setup menu is displayed.
3
Press the corresponding
Tape Select option is selected.
Tape Select
Repeat Play
S-VHS
❿
4
Press the OK or
buttons as many times as
required, until the correct cassette length is
displayed.
E180
E240
E 300
E260
5
Press RETURN twice to exit the menu.
Repeat Play
You can set repeat play to repeat the tape continuously
from beginning to end.
Tape Select
Repeat Play
S-VHS
To...
Repeat play
Do not wish to repeat play
,
buttons, until the
❷
VCR Setup
E180
E240
: E180
: Off
E260
E300
: Off
VCR Setup
: E180
Off
: Off
On
: Off
❿
Press OK or
, until...
On is displayed.
Off is displayed.
Selecting the Recording Speed
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower
quality
To record a cassette... Press the SPEED button on the
In standard play mode SP is displayed.
In long play mode
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or 4 hours and 20 mins.
E-300
300 mins. or 5 hours
S-VHS Play
The DVD-VCR allows you to playback high quality S-
VHS tapes.
Tape Select
Repeat Play
S-VHS
To...
S-VHS play
Do not wish to S-VHS play
ENG-18
remote control, until...
LP is displayed.
VCR Setup
: E180
: Off
Off
: Off
On
❿
Press OK or
, until...
On is displayed.
Off is displayed.