Table of Contents
Advertisement
Connecting an RCA Audio/Video
Input Cable
You can connect other audio/video equipment to your
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
Examples:
You wish to copy a video cassette with
the help of a second VCR.
You wish to play back and/or copy
pictures taken with a camcorder .
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1 Connect one end of the RCA audio/video cable into
the VIDEO INPUT socket on the front of the DVD-VCR.
2 Plug the other end of the audio/video cable into the
appropriate output connector on the other system
(VCR or camcorder).
3 Connect one end of the RCA audio cable supplied
into the AUDIO INPUT sockets on the front of the
DVD-VCR.
Take care to respect the colour coding of the
left and right channels.
4 Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
(DVD-V540/DVD-V440)
1
3
(DVD-V340)
1
3
3
ENG-27
Using the Assemble Edit Function
This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change.
1 Insert the cassette to be edited in your DVD-VCR.
2 Press the ❿
button to start playback.
ll
3 When you reach the position from which you wish
to start the new recording, press the ❿
4 Press the F.ADV/STEP button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
5 While the DVD-VCR is in still mode, hold the REC
button ( ) down for a while to activate the
Assemble Edit function.
6 Select the source from which you wish to record by
pressing:
The PROG buttons for television channels
The INPUT SEL. button for the LINE input
sources
7 Press the ❿
button to start recording.
ll
8 When you have finished recording, press
button.
ll
.
Advertisement
Table of Contents
