Searching For A Specific Sequence - Samsung DVD-V340 Instruction Manual

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an
"index" is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
Seq. being
Prev
Seq. played
etc.
2 1
This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1
After pressing the SEARCH, press the
,
corresponding buttons, until the Go To
❷
[0:00:00] option is selected.
❿
2
Press the OK or .
Next
Seq. etc.
1 2
ENG-25
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.If
the VCR reaches the end of the tape during end
search, the tape will be ejected.
Intro Scan
1
After pressing the SEARCH, press the
,
corresponding buttons, until the Intro Scan
❷
option is selected.
❿
2
Press the OK or .
3 ➛ ➛ ❿ ❿
Press the or buttons depending on the
direction where your desired programme is located.
4
When an Index mark is found the DVD-VCR will
playback the tape for 5 seconds, after which it will
continue searching for the next Index mark.
5
If you want to watch the tape from a particular
Index, simply press ❿ II twice.
INTRO SCAN:
➛ ➛ ❿ ❿