Displaying/Hiding On-Screen Information
GB
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen.
1
USER SET
2
➛ ❿
ENTER
END:RETURN
3
4
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
5
❿
END:RETURN
❷
6
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
2
USER SET
3
➛ ❿
ENTER
END:RETURN
4
5
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
6
❿
END:RETURN
❷
14
Press SETUP on the remote control.
Result:
The programming menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
USER SET
option.
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
Press the corresponding
or
buttons, until the
OSD
option is
❷
selected.
To...
Press ➛ or ❿, until...
Display on-screen information
ON
is displayed.
Hide on-screen information
OFF
is displayed.
On completion, press RETURN twice to exit the menu.
Press SETUP on the remote control.
Result:
The programming menu is displayed.
Press the corresponding ➛ or ❿ buttons to select the
USER SET
option.
Press the ENTER button to select this option.
Press the corresponding
or
buttons, until the
TAPE
❷
SELECT
option is selected.
Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180
E240
E 300
E260
Press RETURN twice to exit the menu.
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples:
You wish to copy a video cassette with the help of a
second VCR (see page 16).
You wish to play back and/or copy pictures taken
with a camcorder (see page 16).
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Connect one end of the RCA video cable into the VIDEO socket
on the Rear of the VCR.
2
Plug the other end of the video cable into the appropriate output
connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable into the AUDIO sockets
on the Rear of the VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
1
R
DVD
AUDIO OUT COMPONENT
VIDE
AUDIO
L
R
Y
VIDEO
L
1
DVD & VCR
LINE IN
LINE OUT
3
R
AUDIO
AUDIO OUT COM
L
R
3
VIDEO
L
15