Presetting the Stations Manually
You do not need to preset the stations manually if
you have already set them automatically.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
Install option.
❿
3
Press the OK or
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
VCR Output CH
Auto Setup
Manual Setup
TV System
VCR Output CH
4
Press the corresponding
Manual Setup option is selected.
❿
5
Press the OK or
to select a Manual Setup option.
Result: The TV STATION TABLE menu is
displayed.
TV STATION TABLE
PR
CH
1
2
3
4
5
DELETE : CLEAR
6
,
Press the
buttons to select a programme
❷
number as required.
❿
.
,
buttons to select the
❷
Install
: CH 38
Australia
Model
Install
: G
Newzealand
: CH 36
Model
,
buttons, until the
❷
NAME
SWAPPING : OK
RETURN
❿
7
Press the
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
MANUAL TUNING
PR
CH
MFT
NAME
➛
8
Press the
or
channels.
Result: The frequency band is scanned and the
first station found is displayed.
9
,
Press the
❷
The station name is set automatically from the
broadcast signal.
10
To change the programme's name, press the
Result: The first letter of the name flashes.
11
To...
Select a character Press the
in the name
Move to the next or Press the
previous character respectively.
12
If you...
Wish to store the
station displayed
Do not wish to
store the station
displayed
13
Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
14
On completion, press the RETURN button three
times to exit the menu.
ENG-12
:
: - -
: -
: - - - -
MEMORY : OK
RETURN
❿
buttons to start scanning the
buttons until the NAME is selected.
Then...
,
button until the
❷
required character is displayed
(letters, numbers or "-" character).
➛
❿
or
buttons
Then...
,
Press the
buttons
❷
until the MFT is selected.
➛ , ❿
Press the
buttons to
adjust the picture, if necessary.
Press OK to store the station
,
Press the
buttons
❷
until the CH is selected.
➛ , ❿
Press the
buttons to
go on scanning the
frequency band and display
the next station
Go back to the beginning of
Step 14
❿
button.