Intelligent Picture Control; G-Code Extend (Dvd-V540 Only) - Samsung DVD-V340 Instruction Manual

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
❿
2
Press the OK or .
Result: The Setup menu is displayed.
3
Press the corresponding
the User Set option.
❿
4
Press the OK or buttons to select this option.
Result: The User Set menu is displayed.
Australia Model
Colour System
IPC
G-Code Extend
Newzealand Model
Colour System
NICAM
IPC
G-Code Extend
5
Press the corresponding
IPC option is selected.
❿
6
Press the OK or buttons to select the IPC
(intelligent picture control) option.
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
7
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
➛ ❿
8
Press the or buttons until the picture is
displayed according to your preferences.
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
9
On completion, press the RETURN button.
,
buttons to select
❷
User Set
: Auto
On
: On
Off
: Off
User Set
: Auto
: On
On
: On
Off
: Off
,
buttons, until the
❷
❷
ENG-16
G-CODE Extend
To prevent delays or over-runs the VCR has a function
called G-CODE EXTEND allowing you to extend the
recording time by up to 60 minutes.
1
After pressing the MENU, press the OK or
2
Press the corresponding
the User Set option.
❿
3
Press the OK or buttons to select this option.
Result: The User Set menu is displayed.
Australia Model
Colour System
IPC
G-Code Extend
Newzealand Model
Colour System
NICAM
IPC
G-Code Extend
4
Press the corresponding
G-Code Extend option is selected.
❿
5
Press the OK or buttons to set the G-Code
Extend time by increments of 10 minutes.
6
To turn off, press OK or
Off shows.
(DVD-V540 Only)
❿
.
,
buttons to select
❷
User Set
: Auto
Off
: On
10
: Off
20
30
40
50
60
User Set
: Auto
: On
Off
: On 10
: Off
20
30
40
50
60
,
buttons, until the
❷
❿
buttons repeatedly until