Intelligent Picture Control - Samsung DVD-V 62K Instruction Manual

VCR
Selecting the Colour Mode
GB
User Set
Auto Power Off : Off
Screen Messages : On
User Set
Auto
Colour System : Auto
PAL
IPC : On MESECAM
B/W
14
Before recording or playing back a cassette, you can select the
required system standard.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
After pressing the MENU, press the OK or ❿ .
1
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the
œ ❷
User Set option.
Press the OK or ❿ to select this option.
3
Result: The User Set menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the
System option is selected.
Press the OK or ❿ button to select
5
Auto PAL
B/W .
B/W Black and White
6
On completion, press RETURN three time to exit the menu.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
Press the OK or ❿ .
2
Result: The Setup menu is displayed.
3
Press the corresponding
User Set option.
Press the OK or ❿¤buttons to select this option.
4
Result: The
5
Press the corresponding
selected.
Press the Ok or ❿¤buttons to select the IPC (intelligent picture
6
control) option.
When intelligent picture control mode is
of the image is adjusted automatically.
Colour
7
To adjust the sharpness manually, press the
OFF
IPC mode .
MESECAM
Press the ➛ or ❿ buttons until the picture is displayed according to
8
your preferences.
If you do not press a button within ten seconds, the
PICTURE
9 On completion, press the RETURN button again.
Intelligent Picture Control ( Remote Control )
1 During playback, press the IPC button.
Result: The
2
Press the ❷ button to turn the IPC (Intelligent Picture Control)
option ON and OFF
When Intelligent Picture Control mode is
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF .
The horizontal picture adjusting appears.
Press the ➛ or ❿ buttons until the picture is displayed according to
4
your preferences.
If you do not press a button within ten seconds, the
PICTURE
5 On completion, press the IPC button again.
œ , ❷¤ buttons to select the
User Set menu is displayed.
œ or ❷ buttons, until the IPC option is
ON , the sharpness
❷ button to turn the
menu disappears automatically.
PICTURE menu is displayed.
.
ON , the sharpness
menu disappears automatically.
VCR
User Set
Auto Power Off : Off
GB
Screen Messages : On
User Set
Colour System : Auto
On
IPC : On
Off
VCR
OK
1
15