Presetting The Stations Manually - Samsung DVD-V70 Instruction Manual

VCR

Presetting the Stations Manually

GB
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
TV STATION TABLE
PR CH NAME DEC
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
MANUAL TUNING
PR :
CH : - - -
MFT : -
DECODER : OFF
NAME : - - - -
MEMORY : OK
RETURN
22
You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the
❷
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4
Press the corresponding or buttons, until the
❷
Setup option is selected.
5 Press the OK or ❿ to select a
Manual Setup
Result: The TV STATION TABLE menu is displayed.
6
Press the or buttons to select a programme number as
❷
required.
7 Press the ❿ button to preset the station.
Result: The menu is displayed.
MANUAL TUNING
8 Press the ➛ or ❿ buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the button, until the is selected.
DECODER
❷
10 Press the ❿ button to activate or deactivate use of the decoder
for the TV station, if necessary.
11 Press the or buttons until the is selected.
NAME
❷
The station name is set automatically from the broadcast signal.
12 To change the programme's name, press the ❿ button.
Result: The first letter of the name flashes.
13 To... Then...
Select a character Press the or button until the
❷
in the name required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
Move to the next or
previous character respectively.
14
If you... Then...
Wish to store the Press the or buttons until the
❷
station displayed is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station
Do not wish to Press the or buttons until the
❷
store the station is selected.
Press the ➛ or ❿ buttons to go on
displayed
scanning the frequency band and display
the next station
Go back to the beginning of Step
15 6
Repeat this procedure from Step onwards, until all the required
stations have been stored.
16 On completion, press the RETURN button three times to exit the
menu.
Clearing a Preset Station
If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
Install
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Manual 2
Press the corresponding
option.
option.
3 Press the OK or ❿ to select this option.
Result: The
4
Press the corresponding
option is selected.
Setup
5 Press the OK or ❿ to select a
Result: The
6
Press the corresponding
TV station (PR) is selected.
7
Press the CLEAR button.
8
Repeat the same procedure from Step
required stations have been cleared.
9
On completion, press the RETURN button four times to exit the
menu.
MFT
CH
14
, buttons to select the Install
❷
Install menu is displayed.
or buttons, until the Manual
❷
option.
Manual Setup
TV STATION TABLE menu is displayed.
or buttons, until the required preset
❷
6
onwards until all the
VCR
GB
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
TV STATION TABLE
PR CH NAME DEC
1 21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
23