Presetting The Stations Manually - Samsung CHT-500 Instruction Manual

VCR
GB
Language
Install
User Set
Auto Power Off
Screen Messages
Auto Setup
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
PR CH
1
2
3
4
5
DELETE : CLEAR
MANUAL TUNING
PR
CH
MFT
DECODER
NAME
20
Downloaded From TheatreSystem-Manual.com Manuals

Presetting the Stations Manually

: English
: Off
: On
Install
: G
: CH 36
NAME DEC
SWAPPING : OK
RETURN
:
: - - -
: -
: OFF
: - - - -
MEMORY : OK
RETURN
You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result: The Install
4
Press the corresponding
Setup option is selected.
5 Press the OK or ❿ to select a
Result: The
TV STATION TABLE
6
Press the or buttons to select a programme number as
# ❷
required.
7 Press the ❿!button to preset the station.
Result: The MANUAL TUNING
8 Press the ➛ or ❿ buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
9
Press the button, until the
❷
Press the ❿ button to activate or deactivate use of the decoder
10
for the TV station, if necessary.
11
Press the or buttons until the
# ❷
The station name is set automatically from the broadcast signal.
12 To change the programme's name, press the ❿!button.
Result: The first letter of the name flashes.
13
To...
Select a character
in the name
Move to the next or
previous character
14
If you...
Wish to store the
station displayed
Do not wish to
displayed
15
Repeat this procedure from Step
required stations have been stored.
16
On completion, press the RETURN button three times to exit the
menu.
, buttons to select the
# ❷
menu is displayed.
or buttons, until the
# ❷
Manual Setup option.
menu is displayed.
menu is displayed.
DECODER is selected.
is selected.
NAME
Then...
Press the or button until the
# ❷
required character is displayed
(letters, numbers or "-" character).
Press the ➛ or ❿ buttons
respectively.
Then...
Press the or buttons until the
# ❷!
MFT is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station
Press the or buttons until the
# ❷
store the station is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and
display the next station
Go back to the beginning of Step
9
onwards, until all the
Install
Manual
CH
9