Table of Contents
Advertisement
CASSETTE OPERATION
REVERSE
MODE
1
2,5
7 STOP
6
4
3
6
7/RETURN
P.CALL
4 1
¡ ¢
4
3
1
2,5
P.CALL
4 1 ¡ ¢
TAPE A or TAPE B playback
1
Press the
ON/STANDBY button to turn the
power on.
2
Press the TAPE (A/B) button.
3
Open the cassette door by pushing the area
marked "PUSH OPEN" .
4
Load the cassette into the TAPE A or TAPE B
cassette compartment.
5
With cassette in both decks, press the TAPE (A/
B) button to switch operation from one deck to
the other.
6
Press the 3 (3/SELECT) button to start play-
back.
To stop playback :
Press the 7 STOP (7/RETURN) button.
Fast forward/rewind :
1 Press the 7 STOP (7/RETURN) button, then
press the TAPE (A/B) button to select TAPE A or
TAPE B.
2 To advance the tape, press the P . CALL ¡ ¢
button. To rewind it, press the P . CALL 4 1
button.
Caution :
To remove the cassette tape, press the 7 STOP
•
(7/RETURN) button, and then open the cassette
compartment.
•
Before changing from one tape operation to an-
other, press the 7 STOP (7/RETURN) button.
•
If a power failure occurs during tape operation,
the tape head will remain engaged with the tape
and the cassette door will not open. In this case,
wait until power is restored.
Selection of reverse mode (TAPE B
only) :
Press the REVERSE MODE button repeatedly to
select the following setting :
•
"
" .... Playback stops after having played both
sides of tape in a deck.
•
"
" ..... Endless playback of both sides of tape.
•
"
" ..... Playback stops after having played one
side of tape.
39
EN
Hide quick links:
Advertisement
Table of Contents
