Kenwood XD-V555 Instruction Manual page 27

4
2
3
3
3/SELECT
1
4
P.CALL
4 1
¡ ¢
P.CALL
4 1 ¡ ¢
Direct search system
1
Press the DISC SKIP button to activate the "TOC
READ" process for every disc in the disc tray.
2
Press the disc number button (DISC 1 - DISC 3)
button to select the desired disc.
3
Use the numeric buttons to select the desired tracks.
•
The numeric buttons can be used to select up
to 9 track numbers for play. When selecting 10
or more track numbers, use the "+10" button.
A. For example, to choose 13
Press the "+10" button and "3" button.
B. For example, to choose 30
Press the "+10" button three times and "0" button once.
4
Press the 3 (3/SELECT) button to start the play-
back.
Notes :
• The selected track will be played back automati-
cally when you press the numeric buttons dur-
ing playback. (It is not necessary to press the
3 (3/SELECT) button.)
• During random playback, direct search system
is not possible.
•
DISC SKIP and DISC 1 - DISC 3 buttons cannot
function during "TOC READ" and disc tray rota-
tion.
Tracks Skipping
Tracks skipping will automatically locate the begin-
ning of any track.
To watch again to the track being
played :
Press the P . CALL 4 1 button for less than 0.5
second during playback.
To move to the beginning of the next
track :
Press the P . CALL ¡ ¢ button for less than 0.5
second during playback.
• To skip a number of tracks at one time, press
the P . CALL 4 1 or ¡ ¢ button repeat-
edly until the desired track number is shown.
• To start playback from a desired track, press the
P . CALL 4 1 or ¡ ¢ button whilst in
the stop mode to select the track number, and
then press the 3 (3/SELECT) button.
Note :
•
Tracks skipping function can only perform on a
single disc.
P . CALL 4 1 or ¡ ¢ button cannot func-
•
tion during pause mode.
27 EN