Kenwood XD-V555 Instruction Manual page 36

KARAOKE
36 EN
Audio mode switching
The audio mode can be changed to STEREO, L-CH,
R-CH and V-CANCEL (VOCAL CANCEL).
The audio mode function is used when the left and
right channels have different signals from each other.
When playing a sound multiplexed disc on which
both vocal and music have been separately
recorded, select the audio mode as desired.
Press the KARAOKE button until the desired sound
mode is displayed.
• Each time the KARAOKE button is pressed, the
mode will change as follows:
STEREO L-CH
Notes :
•
The initial audio mode setting is "STEREO" .
•
The setting will remain unchanged when you
change the disc, when you press the
STANDBY button to enter the standby mode or
when the function is changed from the CD to
another function.
To change general stereo source to
karaoke sources
Even ordinary discs and tapes not recorded specifi-
cally for karaoke can be used as karaoke discs and
tapes by tuning down the main vocal.
Press the KARAOKE button until "V-CANCEL "
appears in the display.
Notes :
•
Use discs which have been recorded in stereo.
The function will not work with mono sources.
• With some discs and tapes the original vocals
may still be heard.
Notes on sound multiplexed karaoke
discs :
Sound multiplexed karaoke discs are discs on which
the main vocal and the BGM (Background music)
have been recorded on one of the two channels
and only the BGM has been recorded on the other
channel.
• For discs which do not belong to this group, the
function will not work properly.
• Discs on which vocal has been recorded on the
left channel and music on the right channel, may
not play properly.
R-CH V-CANCEL
ON/