Table of Contents
Advertisement
Video cable
To Video
input socket
VIDEO OUT
AM loop
FM antenna
antenna
External FM antenna
TV/monitor connection
If the TV/monitor has a video input, connect it to
VIDEO OUT socket on the rear panel of the unit.
Note :
•
If the TV/monitor does not have a video input,
the VIDEO OUT socket on the unit should be
connected to a VCR with a video input, which in
turn should be connected to the TV/monitor
through the TV ANTENNA/CABLE input. (Be sure
to turn on the VCR, and set the VCR's input mode
to "Auxiliary")
Antenna connection
Supplied FM antenna
Connect the FM antenna wire to the FM 75 Ω ter-
minal and position the FM antenna wire in the di-
rection where the strongest signal can be received.
Supplied AM loop antenna
Connect the AM loop antenna wire to the AM LOOP
socket. Position the AM loop antenna for optimum
reception.
Place the AM loop antenna on a shelf, etc., or at-
tach it to a stand or a wall with screws (not sup-
plied).
Notes :
• Do not place the antenna on the main unit as it
may result in noise pick up from the internal dig-
ital electronics.
Place the antenna away from the unit for better
reception.
• If the AM loop antenna and the FM antenna wire
are placed near to the AC power cord, interfer-
ence may result.
External FM antenna
Use an external FM antenna if you require better
reception.
Consult your dealer.
Note :
•
When an external FM antenna is used, discon-
nect the supplied FM antenna wire.
9
EN
Hide quick links:
Advertisement
Table of Contents
