How To Use The Built-In Timer - Kenwood XD-V555 Instruction Manual

HOW TO USE THE BUILT-IN TIMER

•
Before setting the timer, make sure that the clock setting is correct. (page 11)
STANDBY/TIMER
ON/
STANDBY
VIDEO/AUX
TUNER
(BAND)
CD
TAPE (A/B)
POWER
TUNING/TIME
(fi %)
TIMER
4
5
TIMER
MEMORY
/SET
VOLUME
CONTROL
TUNING/
TIME (%UP
fiDOWN)
CD/VCD
TUNER(BAND)
AB TAPE
VIDEO / AUX
MEMORY
/SET
VOLUME
Timer playback
1
Press the ON/STANDBY button to turn the
power on
2
Press the CD (CD/VCD), TUNER (BAND), TAPE
(A/B) or VIDEO/AUX button to select the desired
function, and then adjust the sound volume us-
ing the VOLUME CONTROL.
3
Press the TIMER button repeatedly until "
is displayed.
4
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the hour start time, then press the
MEMORY/SET button.
5
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the minute start time, then press the
MEMORY/SET button.
•
The unit will enter the standby mode automati-
cally, and the STANDBY/TIMER indicator will light
up.
6
When the preset time is reached, the timer play-
back will start.
•
The volume will increase gradually.
To cancel timer operation :
Press the ON/STANDBY button to turn the
power on.
To change the programed contents :
Start again from step
Notes :
•
When performing timer playback using an exter-
nal unit connected to the VIDEO/AUX socket,
only the power of the main unit will be turned
off automatically. (The power of the external unit
will not be turned off.)
•
If you select CD (CD/VCD) or TAPE (A/B), the unit
will enter the standby mode after the playback.
If you select TUNER (BAND) or VIDEO/AUX, it
will enter the standby mode one hour after the
timer playback starts.
•
Once the time is set, the setting will be retained
until a new time is entered.
1
.
"
43 EN