Getting started
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap belt clip
into notches
on both sides
of handset.
For hands-free telephone conversations, use any industry standard 2.5
mm headset (purchased separately). For best results, use an AT&T 2.5 mm
To purchase a headset, visit our website at www.tele-
headset.
phones.att.com or call 1 (800) 222-3111. In Canada dial 1
(866) 288-4268.
or call 1 (800) 222-3111. In Canada dial 1
Plug 2.5 mm headset
into the jack on the side
of the handset (beneath
small rubber flap).
To release belt clip, pull and
unlock one flap from the notch
first before detaching the whole
belt clip from handset.
TONE
MUTE
DELETE
10
REDIAL
PAUSE