Options While On Calls-Handset And Base - AT&T E5655 User Manual

91-000373-030-000_E5655_R4.qxd
Volume
Flash
Off
Flash
11/1/2005
Telephone Operation
Options while on calls - Handset
and Base
Volume control
Press the top ( + ) or the bottom ( - ) of the
button on the handset or press
button on the base to adjust listening volume.
UME
Each button press raises or lowers volume by one level.
When you change the volume level, the new setting is
saved. The new volume level will be applied each time
you use the handset, speakerphone or headset.
Call waiting
If you subscribe to a Call Waiting service with your local
telephone service provider, you will hear a beep if some-
one calls while you are already on a call. Press
put your current call on hold and take the new call. You
can press
FLASH
Volume
between calls.
NOTE: On the handset, if you have accessed the directory while on a
call, you will need to press CLEAR then FLASH to put the call on hold and
take the new call.
3-way conference calls
While a call is in progress, a person at one other hand-
set can press
PHONE
person at the base can press
the call.
A person at either handset can press
handset in the base to drop out of the conference call.
A person at the base can press
drop out of the conference call. A conference call will
not be terminated until all the handsets and the base
hang up.
Only two handsets or one handset and the base can be
connected to an outside call at the same time.
12
10:03 AM Page 12
^ V
or
at any time to switch back and forth
or to join the call. A
SPEAKER
SPEAKERPHONE
OFF
SPEAKERPHONE
VOLUME
of the
VOL-
to
FLASH
to join
, or place the
to