Base Settings - AT&T E5655 User Manual

91-000373-030-000_E5655_R4.qxd
Highlighted
menu item
> DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
11/1/2005 10:04 AM
Telephone Operation

Base settings

At the feature menu you can change settings to
customize how the telephone works.
Press , then use the
SELECT/MENU
scroll to the feature you want to change. As you scroll
through the menu, the top menu item is always high-
lighted with a > symbol. Press
the highlighted item.
Press at any time to cancel an operation, back
CLEAR
up to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a ring volume level
(1-6), or turn the ringer off (0). Use the
to hear an example of each volume level, then press
to select the one you prefer.
SELECT/MENU
NOTE: The ringer volume level also determines the level of ringing for
intercom calls (see page 14). If the base ringer volume level is set to off (0),
the base will be silenced for all calls.
Ringer volume can also be temporarily adjusted by
pressing during incoming ringing.
VOLUME
The next call will ring normally.
Ringer tone
This feature allows you to choose one of 10 ringing
^V
tones. Use the buttons to hear an example of
each ringer tone, then press
the one you prefer.
Key tone
The base is factory programmed to beep at each key
^V
press. Use the buttons to select
then press
SELECT/MENU
NOTE: If you select OFF, you will not hear a beep when you press
keys.
19
Page 19
^V
buttons to
to select
SELECT/MENU
^V
buttons
to select
SELECT/MENU
or
ON OFF
to save your preference.
,