Table of Contents
Advertisement
Flash
Flash
Telephone Operation
Options while on calls - Handset
and Base
Volume control
Press the top ( + ) or the bottom ( - ) of the
button on the handset or press
Volume
VOLUME
Each button press raises or lowers volume by one level.
When you change the volume level, the new setting is
Off
saved. The new volume level will be applied each time
you use the handset, speakerphone or headset.
Call waiting
If you subscribe to a call waiting service with your local
telephone service provider, you will hear a beep if some-
one calls while you are already on a call. Press
put your current call on hold and take the new call. You
can press
Volume
between calls.
NOTE: On the handset, if you have accessed the directory while on a
call, you will need to press CLEAR then FLASH to put the call on hold and
take the new call.
3-way conference calls
While a call is in progress, a person at one other hand-
set can press
person at the base can press
the call.
A person at either handset can press
handset in the base to drop out of the conference call. A
person at the base can press
out of the conference call. A conference call will not be
terminated until all the handsets and the base hang up.
Only two handsets or one handset and the base can be
connected to an outside call at the same time.
button on the base to adjust listening volume.
at any time to switch back and forth
FLASH
or
PHONE
SPEAKER
12
VOLUME
^
V
or
of the
FLASH
to join the call. A
SPEAKERPHONE
, or place the
OFF
SPEAKERPHONE
to
to join
to drop
Advertisement
Table of Contents
