Message Counter Displays - AT&T E5655 User Manual

91-000373-030-000_E5655_R4.qxd
Message counter
11/1/2005 10:06 AM
Answering System Operation

Message counter displays

The message counter usually displays the total number of
memos and incoming messages. See the list below for
explanations of other displays in this counter.
Message counter displays
0 No messages.
1-98 Number of messages/memos, or message number
currently playing (flashes if you have new mes-
sages).
10-99 Current remote access code while setting
(see page 35).
1-8 Current volume level while adjusting.
1-99 (counting) Elapsed time while recording a memo (see page 37)
or announcement up to 90 seconds (page 33).
99 (flashing) Memo recording exceeded maximum time of 99
seconds.
F (flashing) Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing)
Clock needs to be set (see page 32).
A Announce only mode is on (see page 34).
-- System is answering a call, or being accessed
remotely.
-- (flashing) System is being programmed or initialized.
On (or) OF Displayed for one second when any answering
system setting is turned on or off.
02 , 04 , 06 , tS Current number of rings while setting (see page
35).
38
Page 38