Telephone Operation At The Base; Answering A Call; Connecting To A Call With The Speakerphone; Speaker Volume - AT&T 9355 User Manual

9355_book_1ATT 7/12/99
TELEPHONE OPERATION
At the Base
Send paging
tone to handset
and activate
intercom
Mute the
microphone

Answering a Call

To answer a call using the speakerphone, press K on the base. The
SPEAKER light goes on, and the call is connected. To end the call, press
K again.

Connecting to a Call with the Speakerphone

You can make a call at the handset, and then switch to the speakerphone.
1 Make a call at the handset. Press >, then select MUTE on the handset
(to avoid feedback noise).
Press K on the base to connect to the call.
2
Press P on the handset to disconnect the handset.
3
To end the call, press K on the base.
4

Speaker Volume

While using the speakerphone, press E or e on the base to
adjust speaker volume, from 0 (lowest) to 7 (highest). If the volume setting
is set to 7 and you press E, or if it's set to 0 and you press e,
you'll hear a beep to let you know you're already at the maximum or
minimum setting.

Mute

Mute allows you to hear your caller, but prevents the caller from hearing you.
To activate the Mute feature, press M. The MUTE light on the base
goes on.
To deactivate the Mute feature, press M again.
22
2:25 PM Page 22
Adjust speaker
volume
Put caller on hold
Activate
speakerphone