Deleting An Announcement; Setting The Clock - AT&T 9355 User Manual

9355_book_1ATT 7/12/99

Deleting an Announcement

1
If the announcement you want to delete is the currently selected
announcement (A, B, or AO) go to Step 2. If not, select the
announcement by following Steps 1– 4 in "Selecting Your
Announcement" on page 9, then go to Step 2 below.
Press A on the base.
2
Press D while the announcement is playing. The system
3
beeps once when the announcement is deleted.

Setting the Clock

Press c. The Message Window displays CH.
1
Press C. The system announces the current day setting.
2
To change the day setting, hold down < or > until the
3
correct day is announced. Then release the button.
Press C. The system announces the current hour setting.
4
To change the hour setting, hold down < or > until
5
the correct hour is announced. Then release the button.
Press C. The system announces the current minutes setting.
6
To change the minutes setting, hold down < or >
7
until the correct minutes are announced. Then release the button.
Press C. The system announces the new day and time.
8
To check the current clock setting at any time, press C.
2:25 PM Page 13
FEATURE SETUP
13