USER’S MANUAL Part 2 Deluxe Tapeless Digital Answering System with Mailboxes 1725 Fold open this manual for information about this product’s installation and operation. Please also read Part 1 – Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
I N S T A L L A T I O N Connect the line cord. Plug one end of the telephone line cord into the jack labeled TEL LINE on the back of the system. Plug the other end into a phone wall jack. Connect the telephone.
O P E R A T I O N Record and hear Message Window outgoing announcement Use with other buttons to change settings Set and hear time/day Turn system on or off Record memo or phone conversation Delete all or selected messages Preview first five seconds of...
O P E R A T I O N Setting the Clock You’ll need to set the clock so it can record the day and time each message is received. Press and release g. The Message Window displays CH. Press and release C. The current day setting is announced.
O P E R A T I O N Reviewing Your Announcement Set the ANNC SELECT switch to A, B, or AO. Press and release A. Turning the System On/Off Use O to turn the system on and off. When the system is off, the Message Window is blank.
O P E R A T I O N Listening to Your Messages As the system plays back messages in a mailbox, the Message Window displays the number of the message playing. Before playing each message, the system announces the day and time the message was received.
O P E R A T I O N Recording a Memo You can record a memo to be stored as an incoming message. The memo can be up to three minutes long, and will be played back with other messages. Press and release W.
O P E R A T I O N Changing the Remote Access Code The Remote Access Code is preset to 500. You can change the Remote Access Code to any three-digit number from 500–999. DO NOT pick the same number as that assigned to the Priority Calling Code.
R E M O T E Remote Access Code You can use many features of this answering system remotely from a touch tone phone. Most features can be accessed only after you enter a Remote Access Code, preset to 500. You can view the Remote Access Code by tapping c.
R E M O T E Ending Remote Access Call Press *, 9. The system announces “The machine will now hang up,” and disconnects from the line. Changing Your Remote Access Code Connect with the answering system. Press and release 9, 9. The system beeps once.
I N C A S E O F D I F F I C U L T Y If this answering system does not work properly, try the following suggestions. If you’re still having difficulty, call 1 800 222-3111. Message Window Is Blank •...
Telephones. American fold Tapeless Digital Answering System 1725 Remote Commands To connect with your answering system: Dial your telephone number from a touch tone phone. When the system answers, enter your Remote Access Code. The system announces the number of messages and beeps twice.
COMMAND PRESS 1, then enter mailbox Play all messages in a mailbox number 2, then enter mailbox Play only new messages in a mailbox number 4 while message is Repeat message playing 6 while message is Skip message playing 3, then enter mailbox Delete all messages in a mailbox number 3 while message is...