Table of Contents
Advertisement
9355_book_1ATT
7/12/99
Call List Options
You can customize how the phone stores call information. Select whether
the system stores information about
CALLS
. The system comes set to
1
Make sure the
2
Press U >.
3
Use the softkey to select SETUP.
Select DONE until the screen displays LIST:ALL CALLS.
4
5
Select CHANGE to display ALL CALLS or NO CALLS.
6
Select DONE to exit.
Answering System Feature Setup
At the base, you can set up one feature at a time as described below, or you
can set up a feature, and then move on to set up another feature. After you
change one feature, press s until you hear the voice prompt for the
next feature you want to change. Make sure the answering system is on
(see page 27). Press X or x to exit Answering System
Feature Setup at any time.
Announcement Options
NOTE: For information about recording your announcement, please
turn to page 12.
You can record up to three different announcements — A, B, and AO (the
system comes set to A). Announcements A and B are used when you want
the system to record callers' messages. Announcement AO (Announce Only)
is used when you want to give information to callers without accepting
messages. (Some businesses use this announcement to advise callers of
their hours of operation.) By selecting A, B, or AO, you decide which
announcement your callers will hear when the system answers a call.
If you choose not to record an announcement for A or B, the system
answers with a prerecorded announcement: "Hello. Please leave a
message after the tone." The system does not have a prerecorded
announcement for AO.
Selecting Your Announcement
Press c on the base. The Message Window displays CH.
1
Press s until you hear "Selected announcement is ..."
2
Use < or > to move to the announcement option
3
you want.
Press X or x.
4
2:25 PM
Page 9
FEATURE SETUP
ALL CALLS
ALL CALLS
is not displayed.
NO
received, or for
.
9
Advertisement
Table of Contents
