Table of Contents
Advertisement
Diagnostic and Configuration Utilities
Maintaining HBA Firmware Revision Levels
1. Choose the desired HBA.
2. Expand the category list and choose Firmware Maintenance.
3. Click Download.
4. Locate the new upgrade file.
5. Click Open.
6. Expand the category list and choose Adapter Revision Levels.
7. Verify that the new firmware revision is shown.
Modify Diagnostic Driver Parameters in the Windows Registry
This screen provides information about device driver parameters that are
maintained in the Windows registry and allows you to modify those values.
72
PCI Registers—Maintain the values of the PCI configuration registers of
the selected HBA.
Configuration Data—Maintain information about the data in each of the
configuration regions in the flash ROM of the selected HBA.
Driver Parameters—Maintain information about device driver parameters
that are maintained in the Windows/NT registry.
Persistent Bindings—Maintain information about persistent bindings of
the selected HBA.
Link Statistics—Maintain statistics about the arbitrated loop of the
selected HBA.
Status and Counters—Maintain status and counters for bytes, frames,
sequences, exchanges, and so on.
Note:
The new software is transferred to the HBA.
Host Bus Adapter for Windows and Linux Installation Guide
Advertisement
Table of Contents
