HP Integrity rx7620 Datasheet page 115

Table 12-2
Class: HP_EthernetPort
Property name
CIM_ManagedSystemElement
Name
HealthState
OperationalStatus[0]
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault
EnabledState
CIM_LogicalDevice
Key:CreationClassName
Key:DeviceId
IdentifyingDescriptions[0]
OtherIdentifyingInfo[0]
Key:SystemCreationClassName
Key:SystemName
CIM_LogicalPort
PortType
Speed
CIM_NetworkPort
ActiveMaximumTransmissionUnit
AutoSense
FullDuplex
LinkTechnology
NetworkAddresses[0]
PermanentAddress
PortNumber
CIM_EthernetPort
HP_EthernetPort
Property implementation
Physical Device Object (PDO) name (for example,
\Device\NTPNP_PCI0017)
5 (OK) if port has link, 20 (Major Failure) otherwise
2 (OK) if port has link, 6 (Error) otherwise
2 (Enabled). Disabled ports are not modeled
5 (Not Applicable)
HP_WinEthernetPort
System GUID for the port
HPQ: Spare Part Number
Spare part number
HP_ ComputerSystem.SystemCreationClassName
HP_ComputerSystem.Name
Port Type. See CIM_EthernetPort mof for possible
values.
The current bandwidth of the port in bits per second.
Current maximum transmission unit in bytes.
True if port is capable of auto negotiating speed
and/or duplex, False otherwise.
True, if port is operating in full duplex. Not
implemented if port does not have link.
2 (Ethernet)
The current MAC address of the port.
The permanent MAC address of the port.
Port number for multi-port adapters. Not implemented
for single port adapters.
11BEthernet Teaming 115