HP Integrity rx7620 Datasheet page 101

Table 10-2
Class: HP_CommonRecordLog Properties
Property name
OperationalStatus
StatusDescriptions
HealthState
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledState
RequestedState
EnabledDefault
CIM_Log
MaxNumberOfRecords
CurrentNumberOfRecords
LogState
OverwritePolicy
CIM_RecordLog
InstanceID
HP_CommonRecordLog
TimeOfLastChange
LastLogClearedTime
Property implementation
OperationalStatus[0] indicates the highest severity of
IPMI SEL log entries and will contain one of the
following:
•
2 (OK), only informational or repaired events exist
in the IPMI SEL log
•
3 (Degraded), at least one degraded event exists in
the IML log
•
6 (Error), at least one critical event exists in the
IPMI SEL log
StatusDescriptions[0] will contain one of the following
corresponding to OperationalStatus[0]:
•
Local SEL log status is OK
•
Local SEL log status is DEGRADED
•
Local SEL log status is FAILED
•
5 (OK), when OperationalStatus[0]=2 (OK)
•
10 (Degraded), when OperationalStatus[0]=3
(Degraded)
•
20 (Major Failure), when OperationalStatus[0]=6
(Error)
2 (Enabled)
5 (No Change)
2 (Enabled)
0 (Indicates variable length records)
Total number of filtered SEL events that affects the
system or partition. Filtered events are the events
with alert level 3 or above.
(HPQ_CommonLogEntry instances)
2 (Normal)
2 (Wraps When Full) The IML entries will fill up
available IML non-volatile memory space until no room
is left. The oldest log entries will then be deleted as
needed to create room for new log entries.
HPQ:HPQ_CommonRecordLog
Time of last log change
Date and time, when the log was cleared
recently.
9BSEL Record Log 101