Table of Contents
Advertisement
Chapter 1
Overview
Online Insertion and Removal (OIR)
SA-VAM2+
Online insertion and removal (OIR) is supported on the SA-VAM2+. Before removing the SA-VAM2+,
we recommend that you shut down the interface so that there is no traffic running through the
SA-VAM2+ when it is removed. Removing a SA-VAM2+ while traffic is flowing through the ports can
cause system disruption.
Port Adapter Jacket Card
OIR on the Port Adapter Jacket Card is not supported; however, the SA-VAM2+ within the Port Adapter
Jacket Card does support OIR. You must have the chassis powered off to install or remove the Port
Adapter Jacket Card. See the
the Port Adapter Jacket Card.
LEDs
This section includes information about the LEDs for the SA-VAM2+ and the Port Adapter Jacket Card.
See the
Card.
SA-VAM2+
The SA-VAM2+ has three LEDs, as shown in
LEDs.
Figure 1-3
ENCRYPTION/COMPRESSION
Table 1-3
1
OL-5979-03
Port Adapter Jacket Card Installation Guide
Port Adapter Jacket Card Installation Guide
SA-VAM2+ LEDs
2
1
3
SA-VAM2+ LEDs
LED Label
Color
State
ENABLE
Green
On
VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide
for more information about the Port Adapter Jacket
Figure
1-3.
Table 1-3
Function
Indicates the SA-VAM2+ is powered up and enabled for
operation.
Online Insertion and Removal (OIR)
for more information about
lists the colors and functions of the
SA-VAM2+
1-7
Advertisement
Table of Contents
