Rear Panel Leds - Cisco FPR1150-ASA-K9 Hardware Installation Manual

Overview
1
3
5
7
9
11

Rear Panel LEDs

The following figure shows the LEDs on the rear panel of the Firepower 1100 and describes their states.
Figure 8: Firepower 1100 Rear Panel LEDs
1
Power switch
The power switch provides a way to
Note
gracefully shut down the system and
place it in standby. The power supply
and fan remain active and the fan may
continue to spin at slow speed. To
achieve total power shut down, unplug
the power supply from the chassis.
Management port
USB Type A port
RJ-45 (8P8C) console port
Status LEDs
SSD LED
Network
Status of the network ports:
Link status (L):
• Off—No link, or port is not in use.
• Green—Link established.
• Green, flashing—Link activity.
2 Power cord socket
4 SFP ports (numbered 9 through 12)
6 USB Mini B console port
8 Network data ports
10 Reset button
SSD bay
12
2 Network
Status of the network ports:
Connection-speed status (S):
• Green, flashing—One flash every three
seconds = 10 Mbps.
• Green, flashing—Two rapid flashes = 100
Mbps.
• Green, flashing—Three rapid flashes = 1000
Mbps.
Cisco Firepower 1100 Series Hardware Installation Guide

Rear Panel LEDs

9