Cisco SA-VAM - VPN Acceleration Module Installation And Configuration Manual page 9

Preface
Chapter
1
2
3
4
Related Documentation
This section lists documentation related to your router and its functionality. The documentation
mentioned is available online, or on the Documentation CD-ROM.
•
•
•
•
•
Note
•
OL-5979-03
Title
Overview
Preparing for Installation
Removing and Installing the
SA-VAM2+
Configuring the SA-VAM2+
For hardware information on the Cisco 7200VXR Port Adapter Jacket Card, see the
Jacket Card Installation Guide.
For hardware installation and maintenance information for the Cisco 7200VXR series routers, refer
to the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps341/tsd_products_support_series_home.html
For Cisco 7301 router documentation, refer to the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps352/prod_technical_documentation.html
Port Adapter Installation and Configuration guides, available online at:
http://www.cisco.com/en/US/products/hw/modules/ps2033/prod_module_installation_guides_list.
html
and
http://www.cisco.com/en/US/products/hw/modules/ps2033/products_module_installation_guides_
books_list.html
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware. Access these documents at:
http://www.cisco.com/en/US/products/sw/iosswrel/index.html
Select translated documentation is available at http://www.cisco.com/ by selecting the topic
'Select a Location / Language' at the top of the page.
– To determine the minimum Cisco IOS software requirements for your router, Cisco maintains
the Software Advisor
system are compatible, but it does provide the minimum IOS requirements for individual
hardware modules or components. Registered Cisco Direct users can access the
Advisor at: http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl
For IP security and encryption, refer to the following URL:
http://www.cisco.com/en/US/products/sw/iosswrel/tsd_products_support_category_home.html
Description
Describes the SA-VAM2+ and SA-VAM2+ LED
displays.
Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
Describes the procedures for installing and removing
the SA-VAM2+ from the supported platform.
Describes procedures needed to configure the
SA-VAM2+ in the Cisco 7301 and Cisco 7200VXR
series routers.
tool on Cisco.com. This tool does not verify whether modules within a
VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide
Related Documentation
Port Adapter
Software
ix