Status Leds And Buttons - Cisco Secure Network Server 3700 Series Hardware Installation Manual

Cisco Secure Network Server 3700 Series Appliance Overview
Figure 2: Cisco SNS 3700 Series Appliance Rear Panel, Full Height, ¾ Length PCIe Cards
PCIe slots
1
This configuration accepts two cards in
riser slots 1 and 2 as follows:
• Riser 1, which is controlled by
CPU 1:
• Riser 2, which is controlled by
CPU 2:
3 Modular LAN-on-motherboard (mLOM)
card bay (x16 PCIe lane)
5 USB 3.0 ports (two)
7 1-Gb Ethernet dedicated management
port
9 VGA video port (DB-15 connector)

Status LEDs and Buttons

This section contains information for interpreting front, rear, and internal LED states.
• Plugs into riser 1 motherboard
connector
• Supports one full-height, 3/4
length, x16 PCIe card
• Plugs into riser 3 motherboard
connector
• Supports one full-height, 3/4
length, x16 PCIe card
Cisco Secure Network Server 3700 Series Appliance Hardware Installation Guide
Power supply units (PSUs), which can be
2
redundant when configured in 1+1 power mode.
4 Unit identification button or LED
6 Dual 1-Gb or 10-Gb Ethernet ports (LAN1 and
LAN2)
The dual LAN ports can support 1 Gbps and 10
Gbps, depending on the link partner capability.
8 COM port (RJ-45 connector)
Status LEDs and Buttons
5