Status LEDs
Figure 7: Firepower 1010 Rear Panel
1
3
5
7
9
Status LEDs
Facing the rear of the chassis, the LEDs are located on the top left edge (facing the front of the chassis, they
are in the back right corner of the top). The network port LEDs are at the top sides of each network port.
The following figure shows the status LEDs on the rear panel and on the cover of the chassis.
Cisco Firepower 1010 Hardware Installation Guide
8
Status LEDs
Lock slot
Network data ports
USB Mini B port
Reset button
2
Management port
4
Power cord socket
6
Console port
8
USB Type A port
10
Rubber feet
Overview